Grease Got You Down? Can Am Bushing Grease Is Your Ultimate Solution

CAN-AM vehicles are renowned for their exceptional performance and durability, but like any machine, they require regular maintenance to keep them running smoothly. One crucial aspect of maintenance is the proper lubrication of bushings, which play a vital role in reducing friction and wear. Choosing the right CAN-AM bushing grease is essential to ensure optimal performance and extend the lifespan of your vehicle.

Types of CAN-AM Bushing Grease

CAN-AM recommends using specific types of grease for different bushing applications. The most common types include:

• Synthetic Grease: Offers superior performance in extreme temperatures and high-load conditions.
• Lithium Grease: A multipurpose grease suitable for a wide range of applications, including bushings.
• Moly Grease: Contains molybdenum disulfide to reduce friction and wear, making it ideal for heavy-duty bushings.
• Copper Anti-Seize Grease: Prevents seizing and galling, commonly used on bushings that experience high heat or corrosive environments.

Choosing the Right CAN-AM Bushing Grease

When selecting CAN-AM bushing grease, consider the following factors:

• Application: Determine the specific bushings you need to grease and their operating conditions.
• Temperature Range: Choose grease that can withstand the temperature extremes your vehicle will encounter.
• Load Capacity: Select grease that meets the load requirements of the bushings.
• Water Resistance: Consider the potential for water exposure and choose grease with appropriate water resistance.
• Compatibility: Ensure the grease is compatible with the materials used in the bushings and surrounding components.

Applying CAN-AM Bushing Grease

Follow these steps to properly apply CAN-AM bushing grease:

1. Clean the Bushings: Remove any dirt or debris from the bushings using a clean cloth.
2. Remove Old Grease: If possible, remove any old grease from the bushings using a grease gun or scraper.
3. Apply New Grease: Apply a thin layer of grease to the bushings using a grease gun or brush.
4. Wipe Excess Grease: Remove any excess grease that may have squeezed out.
5. Install Bushings: Reinstall the bushings into their proper locations.

Benefits of Using CAN-AM Bushing Grease

Using the appropriate CAN-AM bushing grease offers numerous benefits:

• Reduced Friction: Grease lubricates the bushings, reducing friction and wear.
• Extended Lifespan: Proper lubrication extends the lifespan of bushings, saving you money on repairs.
• Improved Performance: Well-greased bushings ensure smooth operation and optimal performance.
• Corrosion Protection: Some greases contain additives that protect bushings from corrosion.
• Reduced Noise: Grease helps reduce squeaking and other noises caused by friction.

Common Problems with CAN-AM Bushing Grease

Improper use or selection of CAN-AM bushing grease can lead to several problems:

• Overgreasing: Applying too much grease can attract dirt and debris, leading to premature wear.
• Undergreasing: Insufficient lubrication can cause increased friction and wear.
• Using the Wrong Grease: Choosing grease that is not suitable for the application can compromise performance and cause damage.

Maintenance Tips for CAN-AM Bushings

To maintain the effectiveness of CAN-AM bushings, follow these tips:

• Regular Inspection: Check bushings regularly for wear, damage, or contamination.
• Proper Lubrication: Grease bushings at the recommended intervals specified in your vehicle’s owner’s manual.
• Avoid Overwatering: Excessive water exposure can wash away grease, leading to premature wear.
• Protect from Heat: Avoid exposing bushings to excessive heat, which can deteriorate the grease.

The Bottom Line: The Importance of CAN-AM Bushing Grease

Proper lubrication of CAN-AM bushings is crucial for ensuring the smooth operation, extended lifespan, and optimal performance of your vehicle. By choosing the right grease, applying it correctly, and following maintenance tips, you can keep your CAN-AM running at its best.

Quick Answers to Your FAQs

Q: How often should I grease CAN-AM bushings?
A: Refer to your vehicle’s owner’s manual for specific greasing intervals.

Q: Can I use any type of grease on CAN-AM bushings?
A: No, use only grease recommended by CAN-AM for specific bushing applications.

Q: What are the signs of overgreasing CAN-AM bushings?
A: Excessive grease may leak out and attract dirt, causing premature wear.

Q: What are the consequences of undergreasing CAN-AM bushings?
A: Insufficient lubrication can lead to increased friction, wear, and premature failure.

Q: How do I remove old grease from CAN-AM bushings?
A: Use a grease gun or scraper to remove as much old grease as possible.