Summary
- Apply a thin layer of anti-seize lubricant to the back of the new brake pads and the contact points between the caliper and the pads.
- Follow the same steps for the rear wheels, using the 15mm socket wrench to remove the rear wheel lug nuts.
- Yes, you can perform the brake pad change yourself with the proper tools and following the instructions provided in this guide.
Maintaining your Can-Am Maverick’s braking system is crucial for both safety and optimal performance. Brake pads, being the primary friction components, play a vital role in stopping power. A timely brake pad change is essential to ensure your Maverick operates at its peak. This comprehensive guide will walk you through the step-by-step process of replacing brake pads on your Can-Am Maverick, empowering you to perform this maintenance task with confidence.
Tools and Materials Required
- New brake pads specifically designed for your Can-Am Maverick model
- 13mm socket wrench
- 15mm socket wrench
- 18mm socket wrench
- Torque wrench
- Brake cleaner
- Anti-seize lubricant
Safety Precautions
- Park your Can-Am Maverick on a level surface and engage the parking brake.
- Allow the brakes to cool down before starting any work.
- Wear safety glasses and gloves for protection.
- Refer to your Maverick’s service manual for specific safety instructions and torque specifications.
Step-by-Step Instructions
1. Remove the Front Wheels
- Use the 13mm socket wrench to loosen the lug nuts on the front wheels.
- Lift the front of the Maverick using a jack and secure it with jack stands.
- Remove the lug nuts and take off the front wheels.
2. Unbolt the Brake Calipers
- Locate the two bolts holding the brake caliper to the spindle.
- Use the 18mm socket wrench to remove these bolts.
- Carefully lift the brake caliper off the rotor.
3. Remove the Old Brake Pads
- The old brake pads will be held in place by a retainer clip.
- Use a screwdriver or small pry bar to carefully remove the retainer clip.
- Slide the old brake pads out of the caliper.
4. Clean the Brake Components
- Use brake cleaner to thoroughly clean the brake caliper, rotor, and surrounding areas.
- Remove any dirt, debris, or brake dust that may have accumulated.
5. Apply Anti-Seize Lubricant
- Apply a thin layer of anti-seize lubricant to the back of the new brake pads and the contact points between the caliper and the pads.
6. Install the New Brake Pads
- Slide the new brake pads into the caliper.
- Secure them with the retainer clip.
7. Reinstall the Brake Calipers
- Lift the brake calipers back onto the rotors.
- Tighten the bolts using the 18mm socket wrench to the specified torque.
8. Reinstall the Front Wheels
- Place the front wheels back on the Maverick.
- Tighten the lug nuts using the 13mm socket wrench.
- Lower the Maverick and remove the jack stands.
Repeating the Process for the Rear Wheels
- Follow the same steps for the rear wheels, using the 15mm socket wrench to remove the rear wheel lug nuts.
Bleeding the Brakes
- After replacing the brake pads, it is essential to bleed the brakes to remove any air that may have entered the system.
- Refer to your Maverick’s service manual for the proper bleeding procedure.
Tips for Longer Brake Pad Life
- Use high-quality brake pads designed for your Maverick model.
- Avoid hard braking or overloading the vehicle.
- Regularly inspect your brake pads for wear and replace them as needed.
- Keep the brake system clean and free of debris.
Wrapping Up
Congratulations! You have successfully replaced the brake pads on your Can-Am Maverick. By following these instructions and observing the safety precautions, you can ensure optimal braking performance and peace of mind while enjoying your Maverick adventures.
What You Need to Learn
- How often should I change my brake pads?
- The frequency of brake pad changes depends on driving conditions and usage. Generally, it is recommended to inspect your pads every 5,000-10,000 miles and replace them when they are worn to a thickness of 2mm or less.
- What are the signs that my brake pads need to be replaced?
- Squealing or grinding noises when braking
- Reduced braking performance
- Visible wear or uneven wear on the brake pads
- Pulsation or vibration when braking
- Can I perform the brake pad change myself?
- Yes, you can perform the brake pad change yourself with the proper tools and following the instructions provided in this guide. However, if you are not comfortable working on your vehicle, it is recommended to consult a qualified mechanic.
