Highlights
- This guide will provide you with a step-by-step guide on how to perform a Can-Am Outlander gear oil change, ensuring your ATV operates at peak efficiency.
- Using the 10mm socket wrench, carefully loosen the drain plug and allow the old gear oil to drain into the pan.
- Once the oil has drained, use a rag or gloves to clean the drain plug and the surrounding area.
Maintaining your Can-Am Outlander ATV is crucial for its longevity and performance. One essential maintenance task is changing the gear oil. This guide will provide you with a step-by-step guide on how to perform a Can-Am Outlander gear oil change, ensuring your ATV operates at peak efficiency.
Tools and Materials Required
- New Can-Am Outlander gear oil (refer to your owner’s manual for recommended type and quantity)
- Drain pan
- Funnel
- 10mm socket wrench
- Rags or gloves
Step-by-Step Guide
1. Safety Precautions
Before starting any maintenance work, ensure your ATV is parked on a level surface, the engine is turned off, and the parking brake is engaged. Allow the engine to cool down to avoid burns.
2. Locate the Gear Oil Drain Plug
Locate the gear oil drain plug at the bottom of the gearbox. It is typically a 10mm bolt.
3. Drain the Old Gear Oil
Place the drain pan under the gear oil drain plug. Using the 10mm socket wrench, carefully loosen the drain plug and allow the old gear oil to drain into the pan. Be patient as it may take several minutes for all the oil to drain out.
4. Clean the Drain Plug
Once the oil has drained, use a rag or gloves to clean the drain plug and the surrounding area. Remove any dirt or debris that may have accumulated.
5. Replace the Drain Plug
Apply a small amount of thread sealant to the threads of the drain plug. Tighten the drain plug back into place using the 10mm socket wrench. Do not overtighten, as this can damage the threads.
6. Add New Gear Oil
Using a funnel, pour the new gear oil into the gearbox. Refer to your owner’s manual for the recommended amount and type of gear oil. Fill the gearbox until the oil level reaches the fill hole.
7. Check the Gear Oil Level
Insert your finger into the fill hole to check the gear oil level. The oil level should be just below the bottom edge of the fill hole. If the oil level is too low, add more oil. If the oil level is too high, drain some oil until it reaches the correct level.
8. Replace the Fill Plug
Once the gear oil level is correct, replace the fill plug. Tighten the fill plug securely using the 10mm socket wrench.
Tips for Maintaining Gear Oil
- Check the gear oil level regularly, especially before and after extended rides.
- Change the gear oil according to the manufacturer’s recommended intervals.
- Use high-quality gear oil specifically designed for Can-Am Outlander ATVs.
- Avoid using gear oil that has been contaminated with water or dirt.
- If you notice any leaks or unusual noises coming from the gearbox, have it inspected by a qualified mechanic.
Importance of Regular Gear Oil Changes
Regular gear oil changes are essential for several reasons:
- Lubrication: Gear oil lubricates the gears and bearings in the gearbox, reducing friction and wear.
- Cooling: Gear oil helps cool the gearbox by absorbing heat generated by the gears.
- Corrosion protection: Gear oil contains additives that protect the gearbox components from corrosion.
- Removal of contaminants: Gear oil helps remove contaminants, such as metal shavings and dirt, from the gearbox.
Summary: Gear Up for Smooth Rides
By following these steps and adhering to the maintenance schedule, you can ensure that your Can-Am Outlander ATV‘s gearbox operates smoothly and efficiently for years to come. Regular gear oil changes are a crucial part of ATV maintenance and should not be neglected.
What People Want to Know
Q1. How often should I change the gear oil in my Can-Am Outlander ATV?
A1. Refer to your owner’s manual for the recommended gear oil change interval. It typically ranges from 500 to 1,000 miles.
Q2. Can I use any type of gear oil in my Can-Am Outlander ATV?
A2. No, it is essential to use gear oil specifically designed for Can-Am Outlander ATVs. Consult your owner’s manual for the recommended type.
Q3. What happens if I don’t change the gear oil in my Can-Am Outlander ATV?
A3. Neglecting gear oil changes can lead to premature wear and damage to the gearbox components, resulting in costly repairs.
