What to know
- This blog post provides a comprehensive guide on how to change engine oil in a 2016 Honda CR-V, ensuring a smooth and efficient driving experience.
- Slide under the vehicle and locate the oil drain plug at the bottom of the oil pan.
- Apply a thin layer of new engine oil to the gasket of the new oil filter.
Maintaining your Honda CR-V is crucial for its longevity and performance. One essential aspect of maintenance is changing the engine oil regularly. This blog post provides a comprehensive guide on how to change engine oil in a 2016 Honda CR-V, ensuring a smooth and efficient driving experience.
Tools and Materials Required
- New engine oil (5W-20, 4.4 quarts)
- New oil filter
- Oil filter wrench
- 17mm socket wrench or wrench
- Oil drain pan
- Funnel
- Rags or gloves
Safety Precautions
- Park the vehicle on a level surface and engage the parking brake.
- Allow the engine to cool for at least 30 minutes to prevent burns.
- Wear gloves to protect your hands from hot oil.
Step-by-Step Instructions
1. Locate the Oil Drain Plug
- Slide under the vehicle and locate the oil drain plug at the bottom of the oil pan.
2. Place the Oil Drain Pan
- Position the oil drain pan directly under the oil drain plug.
3. Remove the Oil Drain Plug
- Using the 17mm socket wrench, carefully loosen and remove the oil drain plug.
- Allow the oil to drain completely into the pan.
4. Replace the Oil Drain Plug
- Clean the oil drain plug and apply a new washer if necessary.
- Tighten the oil drain plug securely using the socket wrench.
5. Locate the Oil Filter
- The oil filter is typically located near the top of the engine.
6. Remove the Oil Filter
- Use the oil filter wrench to loosen and remove the oil filter.
- Allow any remaining oil to drain out.
7. Install the New Oil Filter
- Apply a thin layer of new engine oil to the gasket of the new oil filter.
- Hand-tighten the oil filter onto the engine.
- Use the oil filter wrench to tighten the filter further, approximately 3/4 of a turn.
8. Add New Engine Oil
- Using a funnel, pour the new engine oil into the engine.
- Add approximately 4.4 quarts of oil.
9. Check the Oil Level
- Use the dipstick to check the oil level.
- The oil level should be between the “MIN” and “MAX” marks on the dipstick.
10. Reset the Oil Life Indicator
- Start the engine and let it run for a few minutes.
- Turn off the engine and wait a few more minutes.
- Turn the ignition switch to the “ON” position without starting the engine.
- Press and hold the “SEL/RESET” button on the dashboard until the “OIL LIFE” indicator resets to 100%.
Key Points
Congratulations! You have successfully changed the engine oil in your 2016 Honda CR-V. Regular oil changes are essential for maintaining your vehicle’s performance and longevity. By following these steps, you can ensure that your CR-V runs smoothly and efficiently for many years to come.
Frequently Asked Questions
Q: How often should I change my engine oil in my 2016 Honda CR-V?
A: Honda recommends changing the engine oil every 5,000 miles or 6 months, whichever comes first.
Q: What type of engine oil should I use in my 2016 Honda CR-V?
A: Honda recommends using 5W-20 full synthetic engine oil.
Q: How do I dispose of the used engine oil and filter?
A: Most auto parts stores offer free recycling programs for used oil and filters.
