Quick Overview
- Using a 17mm socket wrench, carefully loosen the drain plug and allow the old gear oil to drain out.
- Once the old oil has drained completely, apply a small amount of new gear oil to the washer and reinstall the drain plug.
- Identify the gear oil fill hole on the side of the engine casing, usually covered by a 10mm bolt.
Maintaining your Honda Beat FI is crucial for its longevity and optimal performance. Among the essential maintenance tasks is changing the gear oil, which lubricates and protects the gears in your motorcycle’s transmission. This comprehensive guide will provide you with step-by-step instructions on how to change gear oil Honda Beat FI, ensuring a smooth and efficient shifting experience.
Materials Required
- New gear oil (SAE 80W-90, API GL-4 or GL-5)
- Gear oil drain pan
- Funnel
- 17mm socket wrench
- 10mm socket wrench
- Rags or paper towels
Safety Precautions
- Park the motorcycle on a level surface and allow the engine to cool down.
- Wear gloves and safety glasses to protect yourself from hot oil and metal components.
- Ensure the motorcycle is stable before working on it.
Step-by-Step Instructions
1. Locate the Gear Oil Drain Plug
Locate the gear oil drain plug on the bottom of the engine casing, near the front sprocket. It is usually a 17mm bolt.
2. Drain the Old Gear Oil
Place the gear oil drain pan under the drain plug. Using a 17mm socket wrench, carefully loosen the drain plug and allow the old gear oil to drain out. Be patient, as this may take some time.
3. Clean the Drain Plug and Washer
While the oil is draining, clean the drain plug and its washer with a rag or paper towels. Remove any dirt or debris that may have accumulated.
4. Reinstall the Drain Plug
Once the old oil has drained completely, apply a small amount of new gear oil to the washer and reinstall the drain plug. Tighten it securely using a 17mm socket wrench.
5. Locate the Gear Oil Fill Hole
Identify the gear oil fill hole on the side of the engine casing, usually covered by a 10mm bolt.
6. Add New Gear Oil
Insert a funnel into the fill hole and slowly pour in the new gear oil. The recommended capacity for a Honda Beat FI is approximately 100-120ml.
7. Check the Oil Level
Use a dipstick or a small stick to check the oil level. The oil should reach the “Full” mark on the dipstick. If the level is low, add more oil as needed.
8. Test Ride
Start the motorcycle and let it idle for a few minutes. Shift through the gears to ensure smooth operation. If you experience any shifting problems, check the oil level again and ensure it is correct.
Tips for Prolonging Gear Oil Life
- Use high-quality gear oil that meets the recommended specifications.
- Change the gear oil regularly, as per the manufacturer’s maintenance schedule.
- Avoid riding in extreme conditions, such as excessive heat or cold.
- Inspect the gear oil for any signs of contamination or metal particles.
Final Thoughts: Maintaining a Healthy Transmission
Changing gear oil Honda Beat FI is a relatively simple task that can significantly impact your motorcycle’s performance and longevity. By following these step-by-step instructions and adhering to the tips provided, you can ensure your Honda Beat FI’s transmission operates smoothly and efficiently for many miles to come.
Frequently Asked Questions
Q: How often should I change the gear oil in my Honda Beat FI?
A: Honda recommends changing the gear oil every 4,000-6,000 kilometers or as per the maintenance schedule in your owner’s manual.
Q: What type of gear oil should I use for my Honda Beat FI?
A: Use SAE 80W-90 gear oil that meets API GL-4 or GL-5 specifications.
Q: Can I use automotive gear oil in my motorcycle?
A: No, do not use automotive gear oil in your motorcycle. Motorcycle gear oil is specially formulated for the unique requirements of motorcycle transmissions.
