DIY Triumph: Conquer the Challenge of Removing Integra Transmission Mount

Are you experiencing excessive vibrations or difficulty shifting gears in your Acura Integra? A faulty transmission mount could be the culprit. Replacing the transmission mount is a relatively straightforward task that can significantly improve the performance and drivability of your vehicle. In this comprehensive guide, we will provide step-by-step instructions on how to remove the Integra transmission mount.

Gathering the Necessary Tools and Materials

Before you begin, gather the following tools and materials:

• Socket wrench set
• Ratchet
• Torx bit set
• Jack
• Jack stands
• Safety glasses
• Gloves

Safety Precautions

Before working on any vehicle, ensure you take the following safety precautions:

• Park the vehicle on a level surface and engage the parking brake.
• Allow the engine to cool completely.
• Disconnect the negative battery terminal.
• Wear safety glasses and gloves to protect yourself from potential hazards.

Step-by-Step Instructions

1. Raise the Vehicle

Using a jack, carefully lift the front of the vehicle and secure it on jack stands. Ensure the vehicle is stable and secure before proceeding.

2. Remove the Transmission Mount Bracket

Locate the transmission mount bracket, which is typically attached to the transmission with two bolts. Use a socket wrench to remove these bolts and carefully detach the bracket.

3. Unbolt the Transmission Mount

The transmission mount is usually secured with four bolts to the subframe. Use a socket wrench to remove these bolts, supporting the transmission with a jack if necessary.

4. Separate the Transmission from the Mount

Once the bolts are removed, carefully separate the transmission from the transmission mount. Be cautious not to damage any components during this process.

5. Remove the Transmission Mount

The transmission mount is now free to be removed. Inspect it for any signs of wear or damage and replace it with a new one if necessary.

6. Install the New Transmission Mount

Align the new transmission mount with the subframe and carefully insert the bolts. Tighten the bolts securely using a socket wrench.

7. Reattach the Transmission Mount Bracket

Place the transmission mount bracket back into position and secure it with the two bolts. Tighten the bolts to the specified torque.

8. Lower the Vehicle

Carefully lower the vehicle from the jack stands and remove the jack. Reconnect the negative battery terminal.

Tips and Troubleshooting

• If you encounter any difficulty removing the transmission mount, apply penetrating oil to the bolts to loosen them.
• If the transmission mount is severely damaged, it may be necessary to replace the transmission itself.
• Always refer to the vehicle’s service manual for specific torque specifications and additional instructions.

Recommendations: Enjoy a Smoother Driving Experience

Replacing the Integra transmission mount is a simple yet effective way to restore the smooth and efficient operation of your vehicle. By following these instructions carefully, you can perform this task confidently and save on costly repairs. Remember to take all necessary safety precautions and seek professional assistance if needed.

Frequently Asked Questions

1. What are the symptoms of a faulty transmission mount?

• Excessive vibrations
• Difficulty shifting gears
• Clunking or rattling noises during acceleration or deceleration

2. How often should the transmission mount be replaced?

• The transmission mount should be inspected every 50,000-75,000 miles and replaced as needed.

3. Can I drive with a faulty transmission mount?

• Driving with a faulty transmission mount can cause further damage to the transmission and other components. It is recommended to repair or replace the mount as soon as possible.